150L Energy Saving Integrative Pressured Silver Rooftop Heat Pipe
Solar Water Heater
1. The water will not ﬂow into the tubes directly,the system will
still work even the tube broken.
2. With intelligent controller.
3. Anti-freezing, all-year-round service even in extremely cold
4. Adopting the best conduction performance metal- copper (heat
5. Directly connected with city water without a circulation pump.
6. Working pressure (0.6MPa).
Integrative pressurized series is a renovation model for the solar
hot water, which adopts advanced heat pipe technology, combines
heat pipe solar collector with pressurized tank to form a compact
The vacuum tubes absorb and convert solar energy into thermal
energy, and transfer to the central heat pipe via the aluminum fin.
The heat pipes have tiny amount of purified water sealed inside at
When heated, the medium inside the heat pipes vaporizes at low
temperature (about 30˚C), the vapor rises to the condenser and heat
energy is conducted to water (inside the tank).
When vapor is cooled down, and becomes condensate, falling to the
bottom of heat pipe.
By continuously circulating in this way, heat is carried from
outside to the water inside the tank.
Detailed Product Description:
1. Glass vacuum tube solar collector, high
2. Copper heat pipe, Start up quickly,transfers heat quickly, low
start-up temperature,low temperature resistant
3. Food-grade stainless-steel SUS304 2B inner tank, full-automatic
welding technology,under the protection of magnesium rod,it can
increase of service life.
4. High pressure polyurethane foaming insulation, as the prefect
density and the thermal conductivity coefficient is small, so it
can provide effective heat preservation
5. The outer tank is color steel plate,and it has good double
6. Gravity assisted heat pipe, unilateral heat transfer,high
efficiency,low heat loss.
7. work under pressure,withstand pressure 1.0MPa, The sensation will
be more comfortable.
|Tube space (mm)||75||75||75||75||75||75|
|Net Volume of Storage Tank (L)||125||145||160||190||200||235|
|Diameter of inner/outer Tank(mm)||φ360/φ470||φ360/φ470||φ360/φ470||φ360/φ470||φ360/φ470||φ360/φ470|
|material and thickness of inner tank (mm)||SUS304 /t1.2||SUS304 /t1.2||SUS304 /t1.2||SUS304 /t1.2||SUS304 /t1.2||SUS304 /t1.2|
|material of outer tank||color steel plate 0.45||color steel plate 0.45||color steel plate 0.45||color steel plate 0.45||color steel plate 0.45||color steel plate 0.45|
|material of insulation||polyurethane||polyurethane||polyurethane||polyurethane||polyurethane||polyurethane|
|Size of electrical heater hole||11/4″||11/4″||11/4″||11/4″||11/4″||11/4″|
|Cold water inlet hole||3/4″||3/4″||3/4″||3/4″||3/4″||3/4″|
|Hot water outlet hole||3/4″||3/4″||3/4″||3/4″||3/4″||3/4″|
|T/P valve hole||3/4″||3/4″||3/4″||3/4″||3/4″||3/4″|
|Drain vent hole and Magnesium hole||3/4″||3/4″||3/4″||3/4″||3/4″||3/4″|
|Material||High boron and silicon glass 3.3||High boron and silicon glass 3.3||High boron and silicon glass 3.3||High boron and silicon glass 3.3||High boron and silicon glass 3.3||High boron and silicon glass 3.3|
|Outside thickness (mm)||1.8||1.8||1.8||1.8||1.8||1.8|
|Inside thickness (mm)||1.6||1.6||1.6||1.6||1.6||1.6|
|Light transmission rate||≥0.90||≥0.90||≥0.90||≥0.90||≥0.90||≥0.90|
|Vacuum degree (Pa)||＜10^-2||＜10^-2||＜10^-2||＜10^-2||＜10^-2||＜10^-2|
|Average heat loss coefficient||≤0.75W/ (m².°C)||≤0.75W/ (m².°C)||≤0.75W/ (m².°C)||≤0.75W/ (m².°C)||≤0.75W/ (m².°C)||≤0.75W/ (m².°C)|
|Frame||2 feet ( left-to-right )||3 feet ( left-middle-right )|
|Material||Galvanized steel t1.2||Galvanized steel t1.2||Galvanized steel t1.2||Galvanized steel t1.2||Galvanized steel t1.2||Galvanized steel t1.2|
|Tube support Specification/hole distance (mm)||φ58/75||φ58/75||φ58/75||φ58/75||φ58/75||φ58/75|
|Tube sealing ring||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58|
|Tube dusting rings||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58||Silicon rubber/φ58|
1. Electric heater:1500W-2000W/220V-230V;
2. Intelligent controller: SR609(esp. for integrative pressurized
3. P/T valve (pressure & temperature): WAY-20,0.7MPa;
4. Magnesium rod:diameter 20mm, length 23 cm, copper connector;
5. Temperature sensor;
6. Air vent valve;
7. Vacuum valve;
8. Check valve.
1. What is your Delivery Time?
Full container order:15days.
2. What is your Guarantee Time?
6 years; Provide you with some accessories, they are free for you.
3. Can you accept OEM and ODM ?
YES, printing your LOGO on the product and package, it's free.
4. What is your payment term?
We accept T/T or L/C, Western Union and Paypal.
5. What is your MOQ?
6. How do you pack?
LCL order in plywood case
Full container order in high quality export carton
7. What is your FOB port?
We accept FOB Shanghai, Ningbo, Shenzhen, Guanagzhou, Qingdao etc.
8. What is your monthly production capacity?
9. What is your shipping term?
10. Do you any additional services?
We offer free spares according to your order quantity. Such as
Vacuum Tube, tube holders, dusting rings, silicon rings, screws
And we can offer logo design, Products Advertising Design etc