※SF-380C SINGLE FACER MACHINE
★adopt suction hood structure,matched high pressure powerful
fan,Suction with silence.Operating side closed full cover.
★By vacuum suction by the fan box will corrugated corrugating
absorbed approximately 180 degrees within a negative pressure zone
to complete corrugated shape.
★lower corrugated roller suction width is 2.5mm,it can reduce
corrugated cardboard streak marks.
★Drives independent transmission universal joint drive, isolate the
source of vibration, easy maintenance, smooth running, transmission
gears are oil-immersed lubrication, the gears durable. Cast iron
wall thickness of 240mm.
★install the corrugated lifting trolley above the transport
flyover,we need to use the car to remove the tile when the roller
assembly and pressure roller, etc., and convenient.
★Glue roll unit deliverable device during maintenance coating unit
as a whole is maintained at Sway the machine as a whole through the
eccentric shaft, saving maintenance time and improve efficiency.
★The humidity control apparatus equipped with a spray that flute
type of deformation to maintain good stability, prevent chapped by
dry and wet valve control local area as needed.
★Automatic circulation system for glue, glue cylinder unit, with
good cushioning effect.★glue part can adopt outfitted slide
structure,glue roll surface after grinding engraved pit style
textured and hard chrome plating.
★Corrugated roll materials are used 48CrMO forging steel, quenched
and tempered → roughing → → shaft bore fine boring heads drying
equipment → Welding → tempering to stress → finishing → roughing →
IF quenching → CNC grinder grinding → tungsten carbide or hard
★The gap between the use of glue rollers and the lower corrugating
worm reducer manual fine structure, by limiting their mutual
parallelism adjustment screw and eccentric, easy and intuitive.
★main power variable frequency motor drive, the machine by the
French Schneider (Schneider) program control, low failure rate.
★glue width electric adjustment,to adapt all the base paper change.
★Amount of glue size with electric adjustment, touch screen display
and operation of transmission glue gap by the encoder and high
★Power and operating parts with a safety net to ensure the safety
of personnel in the operation of machinery.
★Corrugating roller and pressure rollers adopt air spring pressure
★Core paper to install a steam humidification devices.
1,effective width:2000mm 2,operate direction:left or
right(Determined in accordance with the customer's facility)
3,design speed:200m/min 4,range of temperature:160—220℃
5,air source:0.4—0.9Mpa 6,steam pressure:0.8—1.3Mpa
7,corrugate flute:(UV type or UVV type)
※Roller diameter parameters:
1,upper corrugated roller diameter: ￠350mm
2. lower corrugated roller diameter:￠380mm
3,pressure roller diameter: ￠385mm glue roller diameter:￠268mm
2,4,paste fixed roller diameter: ￠140mm preheat roller diameter:￠402mm
※powered motor parameters:
3,1,main drive motor:30KW rated voltage:380V 50Hz
4,2,suction motor:11KW rated voltage:380V 50Hz continuous(S1)working
5,3,adjust glue reducer:100W rated voltage:380V 50Hz short (S2)working
6,4,adjust glue gap motor:250W rated voltage:380V 50Hz short
7,5,glue pump motor: 2.2KW rated voltage:380V 50Hz
※Mainly purchased parts, raw materials and origin:
|Name of main parts||Brands or place of origin||material|
|Wallboard and base||Production by own||HT180|
|Rotation joint and Metal Hose||Quanzhou yujie|
|Main drive motor||Hebei hengshui||22KWfrenquency motor|
|bearing||HRB,ZWZ,LYC or zhejiang direction||Bearing of corrugated roller and pressure roller adopt Timken
|Seat belt bearing||Zhejiang wuhuan|
|High pressure air||Shanghai yingfa|
|cylinder||Zhejiang sonor CSM|
|Solenoid valve||Zhejiang sonor CSM|
|traps||Beijing||Inverted bucket type|
|Frequency controller||Taiwan delta|
|Human machine interface||Taiwan WEINVIEW or MCGS|