Water Treatment Equipment for industry Water with RO Membrane by
RO membrane is mainly applicable to various water purification
system, such as household water
purifier, industrial, chemical, medical water purifying machine.
The use of excess pressure pump generates high pressure
permeability, the mineral elements of water molecules and ions
state through a layer of reverse osmosis membrane and dissoled in
most of the heavy mental in water , organic matter, bacterica,
virus, not through the reverse osmosis membrane interception (
reverse osmosis membrane is only 0.001um, and the virus the
diameters of 0.2-0.4, a common bacterica has a diameter of 0.4-1um)
After preparing some glycerin, fixed tools, gloves and other
protective equipment, please rinse and clean the pre-treatment
Then, check whether there is no sludge, oil or any metal debris in
the upstream pipes of Reverse Osmosis. Flush and clean the upstream
pipes, the pressure vessels and the high pressure pipes.
Tear off the packing bag and do not move the trademarks and the
blue package. Smear a small amount of lubricant at the part of the
sealing ring. The end with two small seal rings head into the
shell. Screw on the lid and fasten it. Connect the pipe.
Semipermeable membrane to remove ions, molecules, and larger
particles from drinking water, Can remove chlorine,
fluoride,bacteria, microorganism, etc
|Stable Desalination %||96~98%||96~98%||96~98%||96~98%|
Mean Permeable Flow GDP (L/d)
|Active Film Area ft2(m2)||4(0.4)||4.2(0.42)||5.0(0.5)||5.3(0.53)|
|Test Condition||Test Pressure||65pai(0.45Mpa)|
|Test Water Temperature||25℃|
|Test Water Concentration(NaCl)||500ppm|
|Test Water PH||6.5-7.5|
|Recycle Rate %||15|
|Max Operating Temp.||300psi(2.0Mpa)|
|Max. Inlet Water Temp.||45°C|
|Max Water Inlet Silt Density Index (SDI)||5|
|Inlet Water Chlorine Tolerance||<0.1mg/l|
|Inlet Water PH Range, Continuous Operation||3~10|
|Inlet Water PH Range, Short-Term Cleaning||2~11|
|Max. Pressure Drop of Single Membrane||10psi(0.07Mpa)|
1. Q: Where is your factory, which port for transportation?
A: Our factory located in Xiamen, Welcome to vist our factory. the
port is Xiamen port.
2. Q: How can I get some samples?
A: We are glad to provide you the free sample, leave your contact
3. Q: Can you accept OEM & ODM?
A: Yes, we can accept OEM &ODM
4. Q: What is the delivery time?
A: Within 7 days after receive your payment, accordding to your
5. How to make payment?
A: We accpet T/T,Paypal.Western Union and cash face to face.
6. Q: How can I contact you?
A: Please contact us though below methods, we will reply you within