ultrasonic water flow meter
Description Portable Ultrasonic Flow Meter
TUC-2000P ultrasonic flow meter is a non-contact instrument that
measures both large diameter media flow and can not be used for
measurements that are less accessible and observed. It is very
accurate measurement, almost no interference with the various
parameters of the measured medium, in particular, can not solve
other instruments can not be corrosive, non-conductive, radioactive
and flammable and explosive media flow measurement.
ultrasonic flow meter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a hand held measurement system which is both easy to install and use. It operates according to the difference in the transit time of flight
measured, and determines the flow velocity by measuring the travel
time of a pulse from one transducer to the next.
Flow in the same direction takes less time to travel to the second
transducer than does flow in the opposite direction.
Electroacoustic transducers receive and emit brief ultrasonic
pulses through the liquid of the pipe. Transducers are vertically
placed at both sides of the measured pipe. Sensors are placed on
the pipe and fastened by means of a clamp. The display will quickly
show the flow velocity. It can be used for metallic, plastic and rubber tubes.
Detailed Images ultrasonic flow meter china
Specification ultrasonic flow meter china
Better than 1% accuracy.
0.2% of repeatability.
Positive / negative / net flow totaliser
4 line LCD display.
Operate with clamp-on transducers.
Ni-MH Battery life for up to 12 hours continuous operation.
|Repeatability||Better than 0.2%|
|Accuracy||±1% of reading at rates>0.2 mps|
|Response Time||0-999 seconds, user-configurable|
|Totalizer||7-digit totals for net, positive and negative flow respectively|
|Liquid Types||Virtually all liquids|
|Security||Setup values Modification Lockout. Access code needs unlocking|
|Display||4x8 Chinese characters or 4x16 English letters, display instant
flow, velocity, total flow, signal status|
|Signal output||Non-isolation RS232(FUJI extension protocol), one channel isolation
|Transducers||Clamp on type transducers|
|Transducer Cord Length||Standard 2x10 meters, optional 2x 500 meters|
3 AAA Ni-H built-in batteries. When fully recharged it will last
over 12 hours of operation.
100V-240VAC for the charger
|Data Logger||Built-in data logger can store over 2000 lines of data Housing
|Handset Weight||514g (1.2 lbs) with batteries|
Features ultrasonic flow meter china
2.Wide measuring range
3.Large capacity battery
4.Built-in printer,Built-in data logger
5.RS485 communication interface
6.Multiple input and output signals
7.used in tap water, heating, water conservancy, metallurgy,chemical industry, machinery, energy, etc. Also can be used
for production of water, balance debugging, debugging, network monitoring, energy saving monitoring.
Selection Guide ultrasonic flow meter china
|Type||HS Sensor||HM Sensor||S1 Sensor||M1 Sensor||L1 Sensor||S2 Sensor||M2 Sensor||L2 Sensor|
|Material||Aluminum alloy||ABS||Special high-temperature Material|
|calibration||Calibrate with main unit|
|magnetism||With magnetic||Without magnetic|
|Liquid types||water, sea water, Wast water,chemical liquids,oil,crude
|Suspension concentration||≤20000ppm,may contain very small amount of air bubbles|
|All metals ,most plastics fiber glass ,ect|
|dedicated shielded transducer cable||standard length 5 meter*2,can be extended to 10 meter *2 or 15
Company ultrasonic flow meter china
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished
goods) + good warranty service(1 year free to change a new one
without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
Emma Zhao / Xi’an Yunyi Instrument Co., Ltd.
Mobile: +86 17391772083
What'sapp: +86 18629367136
Tel: + 86-029-88639233
Fax: +86 029 88622793