50W LED Hi Bay Lights With CE / RoHs Approval , 4400 Lm Cree High
Total Harmonic Distortion
Warm White (2800~3300K)
Pure White (4000~4500K)
Cool White (6000~6500K)
Cree XML 8W * 6PCS
Alu Shell + Clear PC Lens Cover
<5% @ 5,000hrs
Green Lighting, ECOfriendly: There is no harmful heavy metals such as mercury, lead and so on,
no flicker, start fast, no ultraviolet rays, no attract mosquitoes,
no damage because of frequent switch.
Safe, Efficient: Adopt internally installed wide voltage and wide frequency
constant current topology isolation circuit design for power
supply, small size, power conversion efficiency is greater than
88%. There is protection in open circuit, short circuit, overload,
lightningsurge and other security protection function, with low
noise, low temperature, high efficiency, high power factor, energy
saving, environmental protection,security, long lifespan.
Excellent heat: Unique thermal body design, perfect combination to electrical box,
conduction diffusion, so as to reduce the temperature in the body,
effectively ensuring the lifespan of the light source and the power
Long lifespan: More than one chip integrated single mode group of light source,
lifespan above 50,000 hours.
Diagram of degradation for Luminous:
LUMINOUS INTENSITY DISTRIBUTION
AVERAGE AND CENTER E Figure
Workshops, factories, storehouses, toll stations, gas stations,
supermarkets, exhibition halls, gymnasiums, and some other places
where need industrial lighting.
1. Please firstly install the reflector properly on the heat sink,
and screw down.
2.Then screw down the hoop into the top cap.
3. Hang the body lamp on the installation site.
4. Please hang the chaining steel wire on another installation
5. Connect Live Wire/Null Wire/Ground Wire to electric cable
properly and switch on.
1--- The hook of installing the LED high bay light bearing ability
must be more than 30 KG weight,
or could do a personal safety;
2--- The wire must be passed 3C certification of two core cable,to
reduce the risk of fire hazard;
3--- The wire is three core sheath line from the LED high bay light
derivate, the brown wire is used
to pick up the fire wire, the blue line is used to pick up the zero
line, yellow green line is in the ground,
wired attention, do not the anti- ;
4--- After wiring, the wiring head must do insulation treatment,
copper wire is not exposed outside, to avoid a short circuit or get
5--- Installation should pay attention to disconnect the input
gates, to prevent electric shock;
6--- Non-professionals are not allowed to open the power box, and
Quantity / Box
A) Only professional electrician can install the LED high bay
light, please check the lamp very carefully
B) Please install the LED high bay light follow up the installation
procedure, make sure the screws have been wrested very tightly, the
wires have been connected properly, .Please operate according to
Product Instructions enclosed.