optical input splitter

Brand Name:New Light

Model Number:Mini Type

Place of Origin:China

... the advantages of small volume, the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the

Brand Name:SUNET or OEM

Model Number:Steel Tube Type

Place of Origin:Qingdao,China

...optical splitter are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. The 1x8 optical splitter with 1 input and 8 output fibers with an even split ratio across all fibers regardless of input wavelength. some of

Brand Name:Seacent

Model Number:2x4 type bare device

Place of Origin:Shenzhen,China

...Optic PLC Splitter bare fiber 2x4 type G657A1 1m customized PLC Splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. fiThis PLC Splitter is a 2x4, with 2 input and 4 output fibers with an even split ratio across all fibers regardless of input wavelength. PLC Splitters...

Brand Name:Wuhan Geehe

Model Number:GH-PLC-1X2,2×N

Place of Origin:China Mainland

...Optical Splitter 2 In Out Basic Information: 1xN PLC splitters are precision aligning process to divide a single optical input(s) into multiple optical outputs uniformly, while 2xN PLC splitters divide a dual optical input(s) into multiple optical outputs. Fiberstore PLC splitters offer superior optical...

Brand Name:OEM

Model Number:PLCM-1*16-0.9-SCA-1.5M

Place of Origin:CHINA

...Optic PLC Splitter With Green SC Connectors 1x8 Fiber Optic Splitter Mini Module Type With Green SC Connectors PLC (Planar Lightwave Circuit) Splitters are Single-mode splitters with an even split ratio from one input fiber to multiple output fibers. This PLC Splitter is a 1x8, with 1 input and 8 output fibers with an even split ratio across all fibers regardless of input wavelength. PLC Splitters...

Brand Name:Begate

Model Number:1x8

Place of Origin:China

... , input is bare fiber and output is ribbon fiber . The mini steel tube type , both input and output are 0.9mm tight buffer . ABS module is with 2.0mm or 3.0mm cable as input and output . The LGX box is with mini stainless tube inside so it is also with 0

Brand Name:YINGDA

Model Number:1x8 PLC splitter

Place of Origin:china

...Optic PLC Splitter, FTTH Splitter 1:8 1260 nm to 1650nm PLC (Planar Lightwave Circuit) optical splitter for divided equally or converge optical signal. The design of planar waveguide technology provided a low-cost optical splitter solution with a small package and high reliability features. 1xN PLC optical splitter divided an optical input...

Brand Name:DF/Takfly/Neutral

Model Number:TK-PLC-1X3-SA-1M

Place of Origin:Shenzhen, China

...Optic PLC Splitter 0.9mm Mini Steel Tube SC APC Blockless SM G657A1 Fiber Optic PLC Splitter Description PLC-Planar Lightwave Circuit Splitter is a kind of power splitter based on the integrated quartz baseplate. Single Mode PLC 1×3 Splitter divide uniformly optical signals from one or two inputs to multiple outputs, and spliter can be operated in reverse direction to combine multiple signals into one fiber or two fibers. Fiber Optic

Brand Name:QY-SP0528

Model Number:PLC-S-2*N*0.9,2.0,3.0-SC/UPC-1m

Place of Origin:Dongguan

...the optical fiber link, is optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON.GPON.BPON.FTTX.FTTH etc.) to connect the MDF and the terminal equipment and to achieve the

Brand Name:GaPho

Model Number:Optic PLC Splitter 1×32 ABS Box

Place of Origin:China

Optic PLC Splitter 1×32 ABS Box Type Single Mode PLC Planar Waveguide SC / APC PLC Planar Waveguide Optical Splitter (PLC Splitter) is an integrated waveguide optical power distribution device based on a quartz substrate. Like coaxial cable transmission, optical network systems also need to couple, branch, and distribute optical signals, which requires optical splitters to achieve. There are multiple input...

Brand Name:KELONG

Place of Origin:CHINA

...,splitters can meet these functions.Splitter is the important device in PON transmission system,splitters can make the input optical signal into multiple output optical signal via splitting technology.There are two kinds of splitting technology:

Brand Name:DYS/OEM

Model Number:1*16 PLC

Place of Origin:shenzhen

...Optical with SC/APC Connector 1*16 PLC Splitter Description of PLC Splitter PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. Siemax’ PLC splitter offers superior optical

Brand Name:KEXINT

Model Number:PLC-1*32-SC/APC

Place of Origin:SHENZHEN

...Optical PLC Splitter 1*32 SC/APC 1×32 Rack Mount 19 Inches PLC (Planar Lightwave Circuit) splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. we are provides a various of 1×N and 2×N PLC splitters...

Brand Name:J&K

Place of Origin:SHENZHEN,CHINA

...Splitter is based on Planar Lightwave Circuit techmology and precision aligning process, can divide a single/dual optical input(s) into multipe optical outputs uniformly and is denoted 1×N or 2×N. PLC splitter is applied in FTTX depoyments, PON networks, CATV links and optical signal distribution currently. PLC splitter offers superior optical...

Brand Name:WRC-1 Input 8 Output 1x8 Steel Tube Fiber Optic Splitter with SC APC Connectors

Model Number:1 Input 8 Output 1x8 Steel Tube Fiber Optic Splitter with SC APC Connectors

Place of Origin:China

...Input 8 Output 1x8 Steel Tube Fiber Optic Splitter with SC APC Connector Description of 1 Input 8 Output 1x8 Steel Tube Fiber Optic Splitter with SC APC Connector Low insertion loss and low PDL Uniform power splitting High reliability Excellent environmental stability Compact size and various package Application of 1 Input 8 Output 1x8 Steel Tube Fiber Optic Splitter with SC APC Connector FTTX systems(FTTP, FTTH, FTTN, FTTC...) Passive Optical

Brand Name:Geehe or OEM

Model Number:PLC 1✖16

Place of Origin:Wuhan,China

...Optic Splitter 1x16 With 3.0m For FTTx Deployments Product description: PLC (Planar Lightwave Circuit) Splitters are Single-mode splitters with an even split ratio from one input fiber to multiple output fibers. This PLC Splitter is a 1x16, with 1 input and 16 output fibers with an even split ratio across all fibers regardless of input wavelength. PLC Splitters...

Brand Name:hanxin or OEM

Model Number:1*8 ABS box splitter

Place of Origin:Shenzhen ,China

...Optic Plc Splitter 2.0mm Cable SC APC PC UPC Connector PLC (Planar Lightwave Circuit) Splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. Available split counts are: 1x4, 1x8, 1x16, and 1x32. PLC Splitters are availble with 900µm loose tube singlemode fiber and terminated or unterminated as per your needs. Unconnectorized PLC splitters...

Brand Name:TTI

Model Number:S-1

Place of Origin:Guangdong, China

...Optical Cable Splitter 1x2 1x4 1x8 1x16 1x32 1x64 Optical PLC Splitter 1. Description: PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. TTI fiber optic...

Brand Name:Gezhi or OEM

Model Number:1x2 FBT Splitter

Place of Origin:China

...optical fiber splitter FBT splitter with SC / APC Fiber optic coupler, is a device applicated in optical fiber systems with one or more input fibers and one or several output fibers.For the fused optical splitter,It can be divided into different ratios.such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other.As a result of its great funciton,Optical

Brand Name:Fiberall or OEM

Model Number:FA-PLCM1×8SA

Place of Origin:China

... fiber type , input is bare fiber and output is ribbon fiber . The mini steel tube type , both input and output are 0.9mm tight buffer . ABS module is with 2.0mm or 3.0mm cable as input and output . The LGX box is with mini stainless tube inside so it is