psi polymer systems

Brand Name:Ritehose

Model Number:600.003

Place of Origin:China

3100 PSI Hybrid Polymer Pressure Washer Hose • Extreme flexibility and soft under pressure, max. working pressure 3100PSI @70°F. • Made of flexible hybrid polymer. • Anti-kink: New developed material to prevent kink, easy management and roll up. ...

Brand Name:CAPTAIN THUNDER

Model Number:See below spec sheet Model No

Place of Origin:China

... High-Rate Polymer Lithium, 6000mAh / 8000mAh - Start-up Current: 600A - Charging Time: 3 to 5 hours - Operating Time: 30 minutes - Power: 84W - Current: 7A - Maximum Pressure: 150 PSI ± 20 PSI - Measurement Accuracy: ± 0.5 PSI - Operating Temperature: -...

Place of Origin:CHINA

... product which is developed and updated lately for preventing the blowout. The packing element is combined by the main body which is made up of the independent innovation rubber based polymer alloy material and

Brand Name:Hebi Pantu

Model Number:1" 5000psi

Place of Origin:China

... for demanding oilfield and drilling applications where reliability and safety are essential. Designed with a robust polymer jacket, it delivers superior resistance to abrasion, harsh fluids, and extreme operating conditions. The hose is equipped with a

Brand Name:JINGNING

Model Number:DN32-DN800

Place of Origin:China

... applications requiring high flexibility, corrosion resistance, and pressure handling capabilities. PTFE, or Polytetrafluoroethylene, is a synthetic polymer known for its exceptional chemical resistance, temperature stability, and non-stick properties. The

Brand Name:FanYing

Model Number:WF6-42

Place of Origin:China

Product Description: Rubber O Rings are a type of seal commonly used in industrial applications. They are made from a variety of different materials, including rubber and polymers. WF-ring and FKM rings are the two most common types of rubber O Rings. WF-...

Model Number:HN46

Brand Name:HAINUO

Place of Origin:SHANXI CHINA

Synthetic Foam,Hollow Glass Bubble,HN46,Polyurethgane Molding,Injection Molding. Hollow Glass Bubble Description: Hollow glass bubbles can also be used in synthetic foam applications to achieve several benefits. Synthetic foam is a type of material that is...

Brand Name:PassionCo

Model Number:1/4"-1"

Place of Origin:Jiangsu, China

Industrial Hybrid Air Line Assembly – High-Efficiency, All-Weather Compressed Air Hose Inner Diameter: 1/4” to 2” | Reinforcement: High-Tensile Fiber Braid | Temperature Capability: -30°C to +80°C | Options: Customized Ends / Branding / Color Product ...

Brand Name:JM

Model Number:4040-P-RO

Place of Origin:CHINA

... 99.1% 150 PSI 10.3 Bar TYPE: Configuration: Reverse Osmosis Spira Membrane Polymer: Composite Polyamide Membrane O Ring: EPDM APPLICATION DATA: Maximum applied pressure: 600 PSI (4.14 MPa); Maximum power flow: 75.0 GPM (17.0 m3 / h)

Brand Name:Antaeus

Model Number:AD-Z048

Place of Origin:Hunan,China

...water jet of 0.040”, using a pump delivering 32,000 psi. This system was originally developed to cut metal, polymer, and fabrics and was widely used in the aerospace and garment industries.Nowadays pressures of over 75,000 psi can be generated which are

Brand Name:JIATUO

Model Number:JTTCSC

Place of Origin:Shenzhen, China

...polymer extrusion process—without interrupting the process when a dirty screen needs to be changed. It's used in melt filtration processes where debris can clog up screens in a very short time and process disruptions are costly. Temperature °F [°C] Up to 650 [343] Max oper. pressure PSI...

Brand Name:Keensen or OEM

Model Number:SW-8040HF

Place of Origin:China

... Polymer: Composite Polyamide Membrane Active Area:400 ft2 Feed Spacer Thickness:28mil Application Data Maximum Applied Pressure: 1200 psi (8.3 MPa) Maximum Chlorine Concentration: < 0.1 mg/L Maximum Operating Temperature: 113° F (45°C) pH Range of

Brand Name:NTS

Model Number:NTS296

Place of Origin:China

... is 60000 psi minimum Surface treatment from hot-dipped galvanized steel and coated with a chromate conversion coating and a clear organic polymer topcoat Holes 7/16" holes on 1" centers on all four sides Cross section 1.50”X1.50", 1.75", 2.00", 2.25",