spherical plain bearings and rod ends

Brand Name:INA

Model Number:SAL60TXE-2LS

Place of Origin:GERMANY

...bearings are different with the most rolling bearing type we indicated . Spherical Plain Bearing SAL60TXE-2LS Rod Ends With A Male Thread are not rolling bearings that they have no cage, no steel balls or rollers. Its dimension is 60×137×44mm,weight is

Brand Name:OEM

Model Number:GE30ES

Place of Origin:China

...deformation of the deep groove ball bearing, The most obvious characteristic for the spherical bearing is its outer diameter surface is spherical. Therefore, it can be inserted into the corresponding concave spherical bearing with self-aligning effect.The

Brand Name:SGC

Model Number:NPB Series

Place of Origin:Fuzhou, China

... Ground • Ball: 52100 Bearing Steel Heat-Treated, Hard Chrome Plated, Precision Ground • Liner: PTFE Lined, Metal-to-Metal Optional • Tolerance: This bearing has tighter tolerances than traditional rod end. Rod end bearings are used on the ends of

Brand Name:Joyreap

Model Number:Rod End Bearing

Place of Origin:China

Rod End Bearing Rod end bearing is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links,tie rodsor anywhere a precision articulating joint is required, and where a clevis end which requires perfect 90-degree ...

Brand Name:PHIDIX

Model Number:Customized

Place of Origin:China

...a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is

Brand Name:SFT

Model Number:SA 5-30 T / K

Place of Origin:China

... sphere. When moving, it can rotate and swing at any angle. It uses a variety of special processes such as surface phosphating, fried mouth, pad, and spray. Made of. Joint bearings have the characteristics of large load capacity, impact resistance,

Brand Name:DEEG

Model Number:GE20ES-2RS

Place of Origin:China

NSK For Forging Machine Knuckle bearing GE20ES-2RS 20*35*16mm Steel Retainer Bearing Steel GE20ES-2RS Knuckle Bearing: 20*35*16mm Bearing Features: Inner Ring Diameter (bore): 20mm Outer Ring Diameter:35mm Width:16mm Basic Dynamic Load Rating Cr:30kN Basic...

Brand Name:BLUEN

Model Number:SA35T/K SA35ES

Place of Origin:CHINA

...Rod End Joint Bearing Features of Rod End Bearing SA 35 ES-2RS / SA35ES / SA35T/K Rod end, requires maintenance, sealed, male thread These rod ends joint bearings contain a spherical plain bearing with a steel/steel sliding contact surface combination and a double-lip contact seal on both sides. The bearing...

Brand Name:TIMKEN / NSK / NTN / FAG / FSK / OEM

Model Number:SB50A

Place of Origin:CHINA

...Rod End Radial Spherical Plain Bearing 50*80*42mm Lubricated SB35A SB40A SB45A SB50A Radial Spherical Plain Bearing Rod End Thicked Steel SB50A Radial Spherical Plain Bearing 50*80*42mm For Machinery Manufacturing Less Friction Specifications: FSK Bearing Model Number SB50A Part Name Radial Spherical Plain Bearing...

Brand Name:TOB Rod End Bearing

Place of Origin:China

...) or male (external) threads. BRS maintenance-free rod ends have special sliding layers of modern dry sliding materials characterised by low friction. They are particular suitable for applications where long service ...

Brand Name:deep dream

Model Number:GEZ50ES

Place of Origin:China Shaanxi

... and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or

Brand Name:SXEGL

Model Number:GE-E

Place of Origin:China

...Spherical Plain Bearing Low Friction SEXGL rod end bearings: can withstand high radial loads (some models can reach several tons) and medium axial loads Self-aligning ability: automatically compensate for shaft misalignment, support deformation or installation errors through spherical...

Brand Name:OEM

Model Number:COM3T

Place of Origin:CHINA

... lubricating radial spherical plain bearing 3) Dimension/mm Standard 4) Material Chrome Steel/GCr15; Stainless steel; Carbon Steel etc. Usually GCr15. 5) Cage Spressed ...

Brand Name:MCBB/ Customization/ Any famous brand

Model Number:PHSB3 spherical plain bearing

Place of Origin:Jiangsu China

... or forging rod ends 5. Metric and inches sizes available 6. Mon-standard avaiable 7. Stainless steel Material avaiable More bearing models for reference, Number d G 6h B C1 W h1 d2 l4 Is d3 d4 dk rs I3 min a Dynamic ...

Model Number:GE80TXE-2LS

Place of Origin:Germany

GE 80 TXE-2LS Radial spherical plain bearing, maintenance-free, metric sizes Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/PTFE fabric ...

Brand Name:SUMA

Model Number:GEG8E

Place of Origin:CHINA

... which is suitable for larger loads mechanism, or a hole in the rod end. It has characteristics of large load capacity, easy mounting and dismounting and mechanism simplification. As Series GE..E, but with wider inner ring and larger ...

Brand Name:SILURIAN

Model Number:GE45ES

Place of Origin:China，liaocheng

...Bearing spherical plain bearings GE40ES GE30ES Rod end joint bearing: Joint bearing is a spherical sliding bearing, the basic type is composed of a spherical sliding spherical contact surface of the inner and outer ring. The joint bearing is mainly composed of an inner ring with an outer ring and an outer ring with an inner sphere, which can bear a large load. According to its different type and structure, it can bear...