steel beam lifting clamp

Place of Origin:Chongqing, China (Mainland)

Brand Name:Shuangyan

Model Number:1 ton

PRODUCT NAME: OIL DRUM LIFTING CLAMP PICTURE: PARAMETERS: FACTORY INTRODUCTION: The former Chongqing Chain Block factory, with more than 40 years history of manual hoist production, is now ...

Brand Name:SEAGULL

Model Number:JT

Place of Origin:CHINA

...Lifting Clamp Steel I Beam Lifting Clamps capacity 5 Ton Red Color Product Description 1. High quality alloy steel with low carbon. 2. Load range:1-10t 3. Safey factor:1.5 times working load limit 4. With safe and secure grip on the beam. 5. Easy and simple to install. 6. Beam width range: available in various styles. 7. Forbidden overload. Technical Parameters SAFT WORKING LOAD (t) ADJUSTABLE BEAM...

Brand Name:JCYC

Model Number:QS

Place of Origin:China

...Steel Plate Lifting Clamp for H-shape T-shape L-shape Steel Plate Lifting Tools Product characteristics: * Suitable for horizontal lifting of "H", "I", "T", "L" shaped steel structures; * Made of high-quality low-carbon alloy steel; * Upper roller design to avoid wire rope damage; * It's easy for the narrow space with sharp triangle; * One pair, pairs or group of clamp...

Model Number:M6-M16

Place of Origin:china

Electrical Steel Beam Clamps It is used for hoisting of light load on steel structure without drilling and welding, saving labor and time. The installation is convenient and fast Cast iron tiger mouth clamp Tiger mouth card Features: This product is ...

Place of Origin:Jiangsu, China

Brand Name:HENGTONG

Model Number:BC-22

...often used in HVAC systems for suspending ductwork, air handlers, and ventilation equipment from beams. They are widely applied in electrical installations for supporting conduit runs, cable trays, and junction boxes along beams. High Qualilty Beam Clamp 1

Brand Name:ZS

Place of Origin:Hebei China

...Steel Structure I-Beam Clamp Supplied By The Manufacturer Introduction Hukou clamp is mainly used for the installation of wires and cables, steel structure factory building installation, etc. It can be applied to various types of steel clamping Product name Tiger Clamp Material Stainless Steel...

Place of Origin:China

Brand Name:FEIDIAO

Model Number:SC-A

SC-A Specifications 1)CE certificated 2)Small size and high effiency 3)It is convenient to carry

Place of Origin:China

Brand Name:OEM

...LIFTING CLAMP QS TYPE 0-8TON Application:Horizontal, I beam steel or shape steel lifting of steel plate Loading range: 0-8ton Two pieces of clamp are used for the testing, but 2 pieces or 4 pieces are recommended for lifting operation, balance beam is needed, otherwise, it will cause automatic unloading Testing load is 2 times of working load The rated loading is the maximum weight as the angle is 60 degree and a pair of clamps

Place of Origin:Hebei

Brand Name:Chenli

Model Number:PDB

...pieces or 4 pieces are recommended for lifting operation,balance beam is needed for big size steel plate. Tested load is 2 times of working load. With lovk spring during the clamp non-work condition,locking device going in nature step-up,put the object in

Brand Name:United

Place of Origin:CHINA

..., pipelines, and other parts to structural beams. They provide exceptional durability and resistance to corrosion since they are made especially for use with stainless steel beams. Beam clamps made of stainless steel are used in a variety of contexts and

Brand Name:QHMAG

Model Number:QEPM-COIL

Place of Origin:CN

...Steel Billet Lifting, Electro Permanent Magnets With Beam Sets Permanent magnetic lifter advantages 1. Economical,Energy saving, Environment protection Electric permanent magnet system only use electricity at the moment of magnetic charging and demagnetization, no need power during working process, no temperature rise, save electricity power more than 95% compared with electromagnet, big reduction of using cost. Both lifting...

Place of Origin:China

Brand Name:Jentan

Model Number:JTLC-G

... limit represents the maximum authorized load when the clamp is used in pairs with a lift angle of 60°. In lifting operations, the clamps can be used in pairs or multiples. Adjust the thickness of the clamp position of the tongue according to the plate to

Brand Name:KOKA

Model Number:KK-BC-01

Place of Origin:Shanghai

...provide a mounting base for conduit hangers or threaded rod. Features: May be used on top or bottom flange of the beam. Beveled lip allows hanging from top flange where clearance is limited. may be installed with the set screw in the up or down position.

Brand Name:HORIZON

Model Number:flange clamp

Place of Origin:CHINA

...the swiveling fingers grasp and tighten the waler flanges to the H20 beam. Mount the flange clamps with the hexagonal nuts facing downwards (towards the bottom of the formwork). This protects the nuts against soiling during pouring concrete. Bar Ø (mm)

Brand Name:WST

Model Number:SA007

Place of Origin:China

Steel H20 Beam Doka Clamp For Construction Formwork The formwork U beam clamp consists of u clamp and L&R hook or hex nuts. The U clamp is made of Q235 steel, the L&R hook is made of cast iron QT450-10. it is used to hold and secure fastening of timber beam and steel...

Brand Name:NC0194

Model Number:0194

Place of Origin:Mainland China

M8 M10 M12 Manufacturers Support OEM Galvanized Steel Beam Clamp Heavy Duty Beam Clamp Product Details Product Name:Heavy Duty Beam Clamp Material:Malleable Iron Surface:Galvanized Bolt:M8 M10 Application:Electrical Max Load:1200kg or 2500kg Packing:...

Place of Origin:China

Brand Name:PPU

...: Vertical lifting of steel plate. 2.Loading range:0 to 8ton. 3.One piece of clamp is used for the testing, and one piece or two pieces are recommended for lifting operation. 4.Multi plates can not be lifted. only lift one piece of clamp one time. Up the

Brand Name:RANLIC

Model Number:RL-840

Place of Origin:Hangzhou,China

...attachment of a conduit hanger, either directly or by means of a threaded rod. 2) Material:Steel Zinc Plated 3) Size: 1/4"-20 , 3/8"-16 4) Stadard: ISO 9001-2008 Cat.No. Size Tapping RL-50 1" 1/4"-20 ...

Brand Name:Xianchuang

Model Number:BLC-05

Place of Origin:Jiangsu, China

... Structure Wheel Four-wheel Carrying Capacity 1000-1500kgs Hydraulic Cylinders Two Hydraulic Unit One Weight as per order Beam flange diameter Φ800-Φ1250mm Beam barrel diameter Φ100-Φ400mm 1. Mainly production process: according to the design drawings,

Brand Name:ABC

Model Number:ABC-DG3

Place of Origin:CHINA

...Clamp Oil Drum Clamp Stack Height Holding Drum Unloader Description Forklift Oil Drum Lifting Clamp The Forklift Oil Drum Lifting Clamp is a heavy-duty lifting attachment designed to aid in the safe and efficient handling of oil drums using a forklift. The clamp is generally made of durable steel and features several gripping arms that can be adjusted to fit various drum sizes. The clamp...