tapered button bit 38mm

Brand Name:MTH

Model Number:38mm

Place of Origin:CHINA

... light-duty rock drill, to drill the rock hole within diameter of 50mm. Tapered Button Bit Application: Construction works, Energy, Mining and Tunneling Tapered Button Bit Advantage: good drilling performance ,excellent in longevity,long service life ,

Brand Name:MING

Model Number:MZ0438-7

Place of Origin:CHINA

... for spherical button Matched connection: 7 degree taper Diameter: 38mm KINGDRILLING DTH taper drill bit description: To accomplish drilling operations through the taper connection on the drill bit and drill pipe, the tapered button drill bit is mostly

Brand Name:MIRCO

Model Number:Tapered Button Bit

Place of Origin:China

... bit. with carbide buttons hot pressed on bits bodies, it has good performace sna life time. usually used for middle-hard to very hard rock formation. Including: Tapered button bits, Chisel bits, Cross bits Diameter: 26mm to 46mm Degree: 7°, 11°, 12°

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

38mm Tapered Button Bits: We offer high quality of tapered button bits & tapered drilling equipments, these tapered drilling button bits are made with high quality of raw material through special heat treatment, various type suitable for afferent work site. The diameter of tapered bits is from 28mm to 43mm with 4 6 7 11 12 taper...

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:OED/OEM

Model Number:Q7-38-1122-50

Place of Origin:China

...38mm Tapered Button Bit Drill Bit for Granite Rock Drill Head 7 Semi-Ballistic Buttons, 2 water holes on front, 1 one on side: Tapered design with copper Tapered Bits Description: (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit Diameter: 32mm,34mm,36mm, 38mm,40mm (3)Tapered connection: 6 degree, 7 degree, 11 degree, 12 degree etc. (4)Material: Alloy Steel Bar 45CrNiMoV, Tungsten Carbide Tips YK05 or T6. (5)Button...

Brand Name:MIROC

Model Number:Taper Button Bit

Place of Origin:Shandong, China

...38mm Short Skirt Tapered Button Bit For Small Hole Drilling Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Drillers choose tapered cross type bits if the goal is to minimize hole deviation in small hole range drilling. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit...

Brand Name:JCDRILL

Model Number:32,34,36,38,40mm-4,6,7,8,9buttons-7°，11°，12°

Place of Origin:China (Mainland)

... & blast, as well as roof bolting applications, as we are Chinese leading manufacture of rock drilling bits,we have rich experience in reseraching and producing .Our products are sold to many countries of the world and gained lots of trust and praise.Why

Brand Name:SOLLROC

Model Number:32mm-43mm

Place of Origin:China

.../32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits:28/29/30/32/33/34/35/36/37/38/40/41/42/45mm Taper Angle (Degree):4 degree/ 6 degree/ 7 degree/

Brand Name:Kinglong drilling

Model Number:Tapered Button Bits

Place of Origin:China

...: 6, 7, 11, 12. C:Numbers of Tungsten Carbide Tips:4, 7, 8. D: Available Diameters of Each Button Tips:Gauge Buttons:7mm,8mm,9mm,Front Buttons:6mm,7mm,8mm. Product Name: 30-40mm 7 degree taper rock drill bit Types Tapered chisel bits, Tapered cross bits,

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... description of Rock Drilling Bits Materials and produce process details : Materials- we use 45CrNiMoVA and YK05 Tungsten carbide to produce our taper drill bit , both are famous materials for drill bit produce in the world . Advanced technology---We

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits...

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

... primary drilling time and higher drilling efficiency, so that the button bit is popular among the users. Our taper button bit is made of high quality raw material through special heat treatment, which ensures the high drilling performance. At present,

Brand Name:Glorytek

Model Number:option

Place of Origin:China

...Tapered Carbide Button Bits Button bits are widely applied in Hand Hold drilling system for dimensional stone quarrying.Made with high quality of raw material through special heat treatment. Tapered button drill bit size: from 32mm-42mm, tapered 4, 5, 6, 7, 11 and 12 degree, with 4, 5, 6 and 7 buttons. Thread button drill bit...