3.5 L - 41.6 L Cartridge Filter Vessels / Self cleaning brush filter vessel

Self cleaning brush filter vessel by gravity filter down to 50 micron particle removal

Description:
The brush type self cleaning filter is mainly used in the fluid which contains more gravity impurities in liquid to be filterred. It's gravity filter.
Automatic self-cleaning filter is a kind of filter which is suitable for bad environment. It's with 3500 micron- 50 micron mesh and 8”-36”pipeline diameter for different using requirements. The cleaning process is started by a differential pressure switch which is monitoring the differential pressure of inlet and outlet, normally the pre-set value is 0.5bar (7psi).
Suitable for filters with DN25~DN900 pipeline to choose from. With advantages of continuously fluid flow, safety operation, simple maintenance, this kind of filter is widely used in all industries.

Work process:
When the differential pressure of inlet and outlet reaches the pre-set value, the filter will start the cleaning process. The whole self-cleaning process includes two steps: 1. Turn on the drain valve which is on the filter top cover. 2. Two stainless steel brushes inside the filter mesh start to rotate which are driven by motor. The impurities captured by filter mesh are brushed by steel brush and discharged from drain outlet. The whole cleaning process takes about 15-60 seconds. During this time, the filtration system doesn’t interrupt the water supply and the whole operation process is controlled by a control box.

Advantage:

• Uninterrupted water supply: the water consumption of cleaning is very few, which is less than 5% of the total flow. The cleaning time is about 2~15 seconds. When it is cleaning and discharging, water supply is uninterrupted.
• High filtering accuracy: filtering accuracy can reach up to 20μm and there are all kinds of accuracy of filtering screen can be chosen.
• Large filtering area: effective filtering area of standard screen is 7-40 times of inlet area.
• Reliable cleaning: a variety of control modes can be selected, such as manual, differential pressure, time, PLC control, etc.
• Simple and economical installation: varied structure forms, which are suitable for all kinds of site situation installation, without affecting the operating effect.

Structure:

Drawing

Construction material

Operation Principle:
Operating flow rate: 20-5000m3/h
Different water quality and accuracy have different flow rate. Please contact supplier for the detail.
Min working pressure: 2Kg
If the working pressure is too low, then booster pump equipment can be set in the discharge pipeline.
Max working pressure: 10Kg; 150psi
High pressure type can be customized according to user’s requirement. Please contact supplier for the detail.
Filtering area:3000cm2 -20000 cm2
Inlet/outlet diameter:50,80,100,150,200,250,300,350,400,500,600,800mm;
Max working temperature:50°C;
Please notify us if the temperature is above this.

Data sheet

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.