Multi Functional Type 2 Surge Protection Device Single Phase Indoor Mounted

Lightning protection single-phase surge protector , surge arrester

Brief introduction

Surge protector is the lightning protection measures taken by Zhejiang toer Electric Co., Ltd. for the electrical system. It is an electronic device for providing safety protection for various electronic equipment, instruments and communication lines.
When the peak current or voltage is suddenly produced in the electrical circuit or communication line because of the external interference, the surge protector can guide the shunt in very short time, thus avoiding the damage of the surge to other equipment in the circuit.

Product specification

Product features

1. tunnel type terminal connection, tighter wiring is more compact.

2. use the pluggable module set up, the maintenance is simple

3. copper fittings have good electrical conductivity

4. built-in overheating and temperature control circuit breaker

Notice of product

1. The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.

2. lightning arresters are connected in series between protected equipment

3. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.

4. this product needs no special maintenance. The lightning arrester should be checked regularly, especially in the thunderstorm season and the whole thunderstorm period. When the system fails to suspect the lightning arrester, the lightning arrester can be dismantled and rechecked. If the system is restored to normal after the restoration to the state before use, the lightning arrester has been damaged and must be replaced immediately.

Working principle of product

Surge protector and its voltage limiting functional element are composed of metal oxide varistors in parallel. Each varistor requires an independent disconnector. The principle of the disconnector is a heat release. The function is disconnected through the low temperature welding point and is separated from the metal rod by its own elastic action. After disengagement, the red indication will appear in the transparent window on the front side of the surge protector.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.