Anti Erosion Oilless Bearing Smooth Operation Good Load Bearing

Metal plastic polymer

SF-1P oilless lubrication bearing (reciprocating type)

Product parameters

Substrate properties

Oil-free bearings (oil-free plain bearings) are used for plain bearings. Oil-free lubricated bearings are designed for self-lubricating, oil-free bearings, smooth operation, reliable, and noise-free. Liquid lubrication conditions, separated from the lubricant does not directly contact the sliding surface, you can greatly reduce friction loss and surface wear, this film also has a certain degree of impact absorption.

Our Products are widely used in printing machinery, food machinery, mining machinery, fitness equipment, molds, hydraulic machinery, hydraulic machinery, machine tools, hydraulic turbines, steam turbines, injection molding machines, plastic molding machines, metallurgical equipment, construction machinery, automobiles, valves, pumps, lifts, power tools, textile machinery, rubber machinery, etc.

Material organization

1. PTFE / fluororesin layer thickness 0.05 ~ 0.10mm, dry friction, can be reworked to obtain a higher tolerance level.

2. The copper powder layer is 0.20~0.35mm, which has good load-bearing capacity and wear resistance. Good thermal conductivity can transfer the heat generated during the operation of the bearing. The composite material can penetrate into the gap of the copper powder ball to improve the bonding strength.

3. Low carbon steel provides good load bearing performance and heat transfer.

4. The copper/tin plating layer is 0.002mm, which makes it have better corrosion resistance.

Technical Parameters

typical application

Due to the thick PTFE lubricating layer, SF-1P oilless lubricating bearings (reciprocating type) are mainly used in precision parts such as automobile belt tensioners, pulleys, solenoid valves, air conditioner compressors, and hydraulic pumps．

Oilless sliding bearing refers to a special bearing

The shaft portion of the bearing is called the shaft diameter portion, called the bush and the shaft diameter go together. In order to improve the friction bearing surface properties of the friction material of the inner surface layer of the casting, it is called a bearing lining.

The materials for the bearings and bearing linings are collectively referred to as bearing materials. Bearing applications typically load conditions, maintenance and lubrication or difficult operating areas at low speeds and weights.