SMD 5050 Flexible LED Strip Lights RGB Black PCB Board Waterproof 3 Years Warranty

Black PCB Board Waterproof 5m SMD LED 5050 RGB Flexible LED Strip lights

Description :

he colour changing LED RGB Strip Lights use the colors Red, Green, and Blue (RGB) to create over 16 million vivid color s. All of our LED RGB Strip Lights can be controlled with a basic RGB Controller using pre-programmed modes or can also be controlled using by DMX control giving you full control over your RGB Color Changing LED Strip Lights. Browse through our selection of LED RGB Strip Lights or feel free to give us a call if you are having trouble finding the right LED RGB STRIP lights for your project.

Suited for indirect lighting such as above cabinets, in coves and in tray ceilings where ambience is the desired effect
A 12-Volt DC LED power supply and RGB controller are required.

Product specification:

Installation Information

1. There are designated solder pads (marked"+/-") for solder connection. Note that the maximum soldering time is 10 seconds and the highest soldering temperature is 260 degrees.
2. The smallest unit of our SMD5050 LED flexible strip is composed of 3 LEDs. Each unit can be removed by cutting between the designated solder pads.
3. A simpler installation is guaranteed by applying double-sided adhesive tape on the back-surface of the strip.

Notes for applying double-sided adhesive tapes:
(1) Make sure the back-surface of SMD5050 LED flexible strip is clean and dry, thus to guarantee better adhesive effect.
(2) Suitable pressure is needed after flexible strip is positioned. But note that the LED flexible strip itself and all its components may not be mechnically stressed.
(3) The minimum bending radius of our SMD LED flexible strip is 2cm. Smaller bending radium is also possible only if the circuit board containing no electronic components. It would be better to position the LED flexibel strip after bending to avoid cyclic fatigue.
(4) Make sure the adhesive backing is removed completely.

Safety and Maintainance Information
1. SMD LED flexible strip itself and all its components may not be mechanically stressed.
2. Don't damage or destory conducting paths on the circuit board while installation.
3. To guarantee safety, only qualified personnel are allowed to install LED strips.
4. Make sure SMD flexible strips are mounted to correct electrical polarity.
5. Parallel connection is highly recommended for its high safety. Serial connection is not recommended because unbalanced voltage drop may damage SMD LED flexible strips.
6. Insufficient and unstable power supply may cause flexible strip damage.
7. Don't install SMD LED flexible strips directly on metallic or any other conductive surfaces.
8. Pay attention to standard ESD precautions when installing our LED strip lihgts.

Note:
(1) Material corrosion will not be considered as material defect. It's in user's responsibility to provide suitable protection against material corrosion, including protection measures against moisture and condensation, etc.
(2) Connectors are necessary if you want to connect the cut sections together or connect a section to power.



Other related products

Phenson Lighting Tech.,Ltd （深圳市芬森照明科技有限公司）is a professional manufacturer and provider of various LED lighting products since established in 2003, owns a factory of 6000 square meters with high qualified clear workshops and locate in Shenzhen with 100 staff members,Combining the R&D team(20 engineers), manufacture department and sale&after-sales service team. Phenson factory equiped with advanced automatical Die Bonding&Chip Bonding equipments, SMT machine and molding machines; perfect quality-testing including aging test and safeguard measures; all of these prompt phenson to be the leader in production.we are mainly engaged in scientific research and develop LED newness with advanced technologies. The products produced by Phenson cover interior and exterior LED lighting which widely used in residential, commercial, architectural and industrial lighting.

To supply more innovated design is our goal, we have strong R&D team who are professional and have abundant experience in the areas of technical design, electronics, structure and illumination, most of our products are self-designed with private moulds, also we have passionate person to search sources to meet current market demands, with all our excellent experience and service in this field, we trust Phenson can give more great LED lighting solutions to our customers.As a professional LED Lighting manufacturer, Phenson Invested more than 10% funds of the turnover in R&D, providing users with one-on-one personalized service. Our product have passed UL, CE, EMC, LVD,

ISO9001:2008 & RoHS certifications and sell well in China and are exported to Europe, America, Asia and other areas. We produce a wide variety of products which were highly praised and well accepted by customers.

As a LED light supplier, we mainly focus on Europe and North America market at present, as the development and requirement of LEDs, we would like to have more our customers present LED lighting products in more potential markets based on our efforts.

Feeling Charming of the Light, looking for value of the Light. Our philosophy is " technique as the best,
quality as the first, to be honest to business, to improve constantly". We keep learning and studying to do our
best to be your reliable partner in the world. Join us, let’s grow together.

we have to remind our clients ,our bank account is Phenson Lighting Tech.,Ltd .

Our excellent sales are always at your service. Phenson, lighting up the future!