65-11-T2C-FV1W2E​ 1800lum 30mA IR Reflow Soldering LED​ White SMT

65-11-T2C-FV1W2E​ Mini Top Views IR Reflow Soldering LED ESD Protection​ White SMT EVERLIGHT TAIWAI

Descriptions

The 65-11 series is available in soft orange, green, blue, and yellow. Due to the package design,

the LED has wide viewing angle and optimized light coupling by inter reflector.

This feature makes the LED ideal for light pipe application.

Applications

․Optical indicators.

․Coupling into light guides.

․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting).

․Coupling into light guides.

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection,

otherwise slight voltage shift will cause big Current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time

of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered.

When repairing is unavoidable, a double-head soldering iron should be used (as below figure).

It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN

DELI ELECTRONICS TECHNOLOGY CO.,LTD was founded in 2005.

DELI has developed into a comprehensive supply chain of electronic components.The main business line of

the company include Integrated circuit,Thyristor,diodes,transistors,capacitors,relaysconnectors,switches,

led,sensor,inductor.

DELI always adhering to the principle of Our good service,serving the customers with high-quality electronics products. all products original & new only, most of products passed CE, ROHS, SGS, UL, VDE, FCC certificate.

DELI does not have complicated procedures.

DELI is committed to quality service and first-class quality. Quick Quote - Quickly Lock Inventory - Fast Delivery - Provides personalized service as the goal.

Come on! contact and send your BOM list to DELI.

we are looking forward to supply sincerely and long-term service for you.