High Strength Titanium Alloy Rod

ASTM B348 TC9 TC10 TC11 TC12 high strength Titanium alloy rod

TC9 Ti -6.5AL-3.5Mo-2.5Sn-0.3Si

TC10 Ti-6Al-6V-2Sn-0.5Cu-0.5Fe

TC11 Ti-6.5Al-3.5Mo-1.5Zr-0.3Si

TC12 Ti-5AL-4Mo-4Cr-2Zr-2Sn-1Nb

Industrial pure titanium TA1, TA2, TA3
Excellent stamping performance. Various types of welding can be carried out, and the welding performance is good. The welding joint can reach 90% of the strength of the base metal. It is easy to saw and cut with grinding wheel, and has good machining performance. Excellent corrosion resistance
It is used for parts under 350 ℃ with less stress and parts punched into various complex shapes. Such as condensers in thermal power stations; pipeline systems, valves, and pumps corroded by marine seawater; chemical heat exchangers, pump bodies, distillation towers; seawater desalination systems, platinum-plated anodes; aircraft skeletons, skins, engine parts, beams, etc
TA6
It has good welding performance and high creep strength, but the process has low plasticity and can be deformed under heat. When the alloy is under axial load, it is not sensitive to the cut and the cutting performance is still good.
Parts and welding parts working below 400 ℃
TA7
Poor stamping performance and good thermoplasticity. It can perform various forms of welding with good performance. The strength and plasticity of the welded joint can be equal to the base metal. Mechanical processing performance is the same as industrial pure titanium. Good corrosion resistance, high temperature thermal stability
Do structural parts for long-term work below 500 ℃, can make various forgings
TA8
Good thermoplasticity. Can be welded in various forms with good weldability. The machinability is the same as industrial pure titanium. Good oxidation resistance
Long-term working parts below 500 ℃. Can manufacture engine compressor discs and blades
TC1
Good punchability. Can be welded in various forms with good weldability. The machinability is the same as industrial pure titanium. Good oxidation resistance
Parts for work below 400 ℃. Suitable for all kinds of plates, stamping and welding parts
TC2
At 350 ℃, the endurance strength of 100h is above 400MPa, and the hot working has good plasticity. When heated to 350-400 ℃, there is no tendency to become brittle, so it can be used to weld parts that work at high temperatures
Parts, welding parts, die forgings and bending parts that work below 500 ℃
TC4
Poor stamping and good thermoplasticity. Various forms of welding are possible, and the strength of the welded joint can reach 90% of the strength of the base metal. The mechanical processing performance is good, it needs to use cemented carbide, large cutting volume, slow speed, and sufficient cooling. Good corrosion resistance and good thermal stability. It is one of the most widely used titanium alloys
Parts for long-term work below 400 ℃
TC5
It is stable below 350, and the plasticity decreases at higher temperatures. Forging, stamping and other deformations can be performed under hot conditions
Parts working below 350 ℃
TC9
Thermoplastic is good. Machinability is the same as T alloy. High corrosion resistance. Thermal stability is good
Long-term working parts below 400 ℃. Can manufacture compressor discs and blades
TC10
Poor stamping and good thermoplasticity. Various forms of welding are possible, and the strength of the welded joint can reach 90% of the strength of the base metal. Mechanical processing performance is the same as T alloy. Good corrosion resistance. Good thermal stability, remarkable heat treatment effect, good hardenability
Do long-term work below 450 ℃

Tensile requirements

Tolerance

Baoji Lihua Non-ferrous Metal Co., Ltd. was established in 2006. The company relies on theadvantages of Baoji industry and its strong technical support. It has been engaged in theproduction and sales of non-ferrous metals such as titanium, tantalum and nickel for many years.

The factory covers an area of 800 square meters. The factory has strong technical equipment. There are more than 20 sets of CNC machines, milling and drilling machines, and the annualproduction value is more than 30 million CNY.

    The company's product is high quality and stable for many years, and it has obtained the Certification ISO 9001:2015, BV audit certification.

    The company has been focusing on the improvement and stability of product quality for many years. Based on the business concept of maximizing customer service, we warmly welcome you to come for advice and business negotiation!