Galvanized Surface AISI Forged Alloy Steel Round Bar Punching

Galvanized Surface AISI Forged Alloy Steel Metal Rod Round Solid Bar

Product decription:

300m steel is a kind of low alloy high strength steel, has become the world's highest strength, comprehensive performance is best, the most

widely used one of the best gear steel and reputation.Its mechanical properties with high strength, high transverse plastic, high fracture

toughness, fatigue performance and good corrosion resistance, etc.In China in the mid - 80 - s began AMS6417 copied by American aerospace

material standard, and in 1990 by metallurgical and two joint technical appraisal of aeronautics and astronautics

ABOUT US

We specialsied in kinds of steel products more many years,especially in hot rolled steel round bars ,square bars,flat bars ,cold drawn bars and forged bars.
Our main material are all carbon steel and alloy steel ,such as :aisi1020 1035 1045 1055 s20c s35c s45c s55c ss400 a36 c20 c35 c45 ck45 aisi4140/scm440 aisi4340/40crnimoa aisi8620H,40cr,gcr15,sae52100,20Mn,40Mn,St52,St37,S235JR,etc

1. Grade:

45# 45B S45C C45 CK45 Cm45 AISI1045 SAE1045 ASTM1045 XC45 1.0503 0.1191 1.1201

2. Specification:

Dia: 20-300mm, Length:2000-13000mm or as required

3. Process:

Hot rolled, black surface

4. MOQ:

20mt.

5.. Chemical composition:

6.Quality condition

1): Straightness: 3mm/m (max)
2): Corner Radius: 3(max)
3): The ends will be end cut or gas cut
4): No cracks on the surface

7. Standard:

According to national standard (GB)for our products, if not, supply according to national standards(GB) or agreement.

Characteristic:

• PREN 48.3 Typical for ASTM G48, CPT per G48-C 75C, CCT per G48-D 35C
• Density 0.290 Lbs/cubic inch
• Magnetic permeability 1.003 (200 Oersteds at Room Temp)
• Coefficient of thermal expansion (68-212F) 8.49x10 in/in Deg F
• Higher strength than conventional austenitic grades (304/316)

• Packaging & Shipping:

• Package: In wooded cases , pallets or according to clients' requirements

  Delivery time:stock-45 days after confirming order,detail delivery date should be decided according to production season and order quantity. Tianjin port, Shanghai port and the other main ports in China

TOBO GROUP sales head offce in Shanghai.

We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicians.

We have five branch factories which can supply the best quality pipes, tubes, fittings flanges and related accessories. Now, it owns a number of advanced pipe production equipments, metal, forging, machining, cold forming, hot extrusion, such as heat treatment process, producing 60, 000 tons of pipe fittings. Company with a variety of detection devices, such as nondestructive testing, chemical analysis, metallographic examination, physical experiments. The technical is very strength, our main products contain fittingsforged socket welding fittings and threaded fittings, pipe weld and the materials of the products contain stainless steel ,duplex-stainless steel alloy steel.

In addition, we are authorized by more than 120 top-class mills from South Korea,Japan and China like JFE,SUMITOMO,POSCO,BAOSTEEL, TISCO,LISCO,.TPCO,HENGYANG VALIN and so on .

Our main products as follows:

• Stainless steel pipe & tube

(seamless pipe / welded pipe / square pipe / rectangular tube,duplex stainless / inconel tube)

• Carbon / alloy steel pipe & tube

(seamless pipe / ERW / SSAW / LSAW / UOE / hollow section pipe / Galvanized Pipe)

• Tubing and casting

(line pipe,water pipeline,gas pipeline,oil pipeline)

• Special steel tube

(copper tube/titanium tube/aluminium tube/nickel alloy )

• steel bar

(round bar/angle steel /flat steel/channel steel/steel wire)

• Pipe Fittings

(eblows, equal / reducing tees, concentric/eccentric reducers, caps, crosses, bends, dish end/end cup, stub ends, unions, couplings / hex couplings, swage nipples , nipples, hex. plug, sockolet, weldolet, thredolet, etc)

• Flange

(DIN flange/ AISI flange/blind flange/welding flange/stainless flange/slip on flange)

• steel sheet / coil

(stainless steel/carbon steel/alloy steel/galvanized steel/aluminium )

• Valve

(ball valve/gate valve/butterfly valve/globe valve/swing check valve/ check valve)

In order to comply with the global modernization services development trends and eliminating the varieties distress of the global enterprise‘s purchase in the consumables.. We coordinate the pressure pipe manufacturer which with the scale of production,quality control and high cost performance (has passed ISO 9001 quality series attestation, ccs, DNV,PED/97/23/EC,AD2000-WO,special equipment manufacturing license,ASME-SA182.through a variety of effective assort mechanism to make up the shortage of supply and Post-processing of VAT enterprise, and to supply high quality pipe fittings, because of the superior quality and good service, we have established long term business cooperation with more than 60 countries and areas,which covers Europe, Africa, South America, North America, Middle East, Taiwan and South East Asia and so on.

With many years effort and support from our valuable customers, these products have obtained a big market share in the world.

Our business principle is "Superior quality, Competitive price, Timely delivery and Considerate service " Standing to the principle of “Enterprises focus on the core business”, TOBO will actively promotes the globalization of business strategy approach, using advanced supply chain management technology to service for clients with higher quality and more competitiveness ‘ s products. At the same time, we sincerely reply your inquiry, honesty waiting for your visiting and wish to have cooperation with you at the any time. We welcome all the customers to contact us for more information. We assure you, with our technical knowledge and experience, our company will be one of your Stable, Continuate business parters in China.

info@tobo-group.com