Rogin 1 Second Curing Light TQ8 Powerful Gathering Light

• 1 second curing!
• Metal head to prevent fracture!
• lmported LED, wide-spectrum blue-violet light
• The head is flat to reach difficult area inside the mouth , even 3rd molars in limited mouth opening patient !

Stable and durable

• Fully charged state, light for 10s/time, can be used about 350 times
• Light stability adjustment, not reducing the light intensity due to insufficient power
• Base with light intensity detection, safe and secure

Turbo mode: 1800-2000mW/cm2

Curing time: 1S, 3S

This high-intensity mode is suitable for curing orthodontic brackets, post-core and porcelain veneer photosensitive adhesives;

Full mode: 1200mW/cm2

Curing time: 5S, 10S, 15S, 20S

Suitable for conventional resin curing, with stable light intensity at 1200, which is the conventional mode of a light curing machine;

Ramp mode: 1200mW/cm2

Curing time: 5S, 10S, 15S, 20S

Suitable for conventional resin curing. The light intensity ranges from 0-1200 in the first five seconds, and then stabilizes at 1200. This mode cures more uniformly and the resin shrinks less; it is more suitable for children and people with sensitive teeth;

Check mode:

This is a caries detection mode which is used to detect caries, cracked teeth, etc.; dentists no longer need to purchase a caries detector;

Detection time: 30S, 60S

Advantages of front metal joints:

The latest American imported wide-spectrum LED light source, combined with our professional lens technology, is used to ensure uniform and direct spectrum, better penetrability and reduce light intensity loss; the front connector adopts a 90-angle metal head, which is convenient for molars in the oral cavity. For curing, the patient does not need to open the mouth very wide, and the comfort is greatly improved. The LED light source is designed on the top of the metal head, no light guide rod is required. Under the same light intensity, its heat generation is about 20% lower than that of the model with light guide rod. The metal light source connector is removable and replaceable, and it is not easy to drop and damage; high temperature and high pressure sterilization is not supported, and it is recommended to use it with a disposable isolation bag.

Battery:

National CB certified lithium batteries are used to minimize the hidden dangers. It is safe and reliable with a long service life.

Constant drive technology:

Constant light output;

Light intensity does not decay when the current drops;

Charging base:

The base has its own light metering function, which can test the light intensity of the machine at any time to ensure that the machine is in the best state of use; the new TYPE-C charging interface is convenient and practical.