Stamping Fabrication Metal Battery Spring For Detent 18650 Positive Negative 16x13

Metal Stamping Fabrication For Detent Battery 18650 Positive And Negative Metal Spring 16*13 Battery

Quick Detail

Description

Cold Heading ToggleTest EquipmentHardness tester,Chemical analysis,Digital Measuring Projector, Dynamic Balancing Tester, Plating Tester Tightest TolerancesFlatness of ±0.05Material UsedTerminal: Brass-CDA260,Copper ,Phosphor copper ,Beryllium Copper

OEM copper and brass Terminal blocks/ connector post/ Thimbles for circuit breakers and MCB part

Product overview:

There are mainly three kinds of Electrical Contact Component :
1,Riveting Parts : contact is riveted on copper component .
2,Welding Parts : sheet contact is welded on copper component .
3,Stamping Parts: precious clad metal is stamped into contact bridge component
The manufacturing and test equipment for making Contact Component apparatus such as digital and automotive welding stamping machine, riveting machine, welding Automaton, hi-speed stamper, stamper, coloured metallography ,microscope , 3D coordinator etc. We can develop and manufacture contact component according to customers' specific requirement and the output can surpass one billion pieces annually.

The only difference between the 14500 and 18650 is NOT the output, they both output at 4.2V or 600mA. The difference lies in the capacity, the 14500 at 900 mAh and 18650 at 3000mAh, which means that the 18650 will last about 3 times longer before needing to recharge is all

20 pairs of 18650 battery positive conversion spring contact nickel plate 16.5mm x16mm

Overall dimension: 16.5 x 16 x 0.3 mm / 0.65 x 0.63 x 0.012 inch (L * w * h); Package content: 20 pairs of battery springs

The battery panel is used for the battery box; Applicable to: 18650

This product is only applicable to 1 x 18650 battery case. Note: batteries are not included.

Made of metal, with good conductivity and better electric performance.

Product size (L x W x H) 2.36 x 1.57 x 0.79 inch

Commodity weight 34 G

If you are interest the product, please send your inquiry to me.I will offer the professional service.

Dongguan Fodor Technology Co., LTD., founded in 2015, is committed to the development and sales of electronic heat sink and hardware electronic accessories, including: aluminum extrusion heat sink, cold forging heat sink, water cooling heat sink, cooling fan modules, aluminum stamping products and zinc aluminum die-casting products.Based on the development concept of "Rich quality & leading future", Fodor has the industry perfect supply chain resources, to provide customers with timely, efficient and high-quality services, reduce the inconvenience of customers in each procurement link, really make customers save time, effort and worry.

Fodor now has 2 senior engineers of water cooling radiator, 2 senior engineers of aluminum extrusion heat sink, 2 senior engineers of stamping, 2 senior engineers of fan module, and 10 other engineers and quality engineers, to control product design optimization and quality requirements.Sidework, Proe, CAD, PDF and other documents can be accepted by Fodor company for project consultation. The surface treatment that Fodor company can complete includes: anodizing, electrophoresis, complex acid salt, electroplating, painting, powder spraying, chromium plating and other processes to meet the needs of our customers.

Fodor adhering to customer first, achieve the win-win situation, is willing to establish the long-term cooperation relations with the general customers。