Sign In | Join Free | My lightneasy.org
lightneasy.org
Products
Search by Category
Home > Air Cleaner Parts >

DC to DC Converter MPPT Solar Charge Controller Battery Charger

  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

DC to DC Converter MPPT Solar Charge Controller Battery Charger

Product Description:

  • The output voltage is stabilized, free of peaks, smoothed and filtered.
  • Galvanic isolation between input and output:
  • No overvoltage at the output and thus protection of the consumer if the ground line is lost.
  • Clean, undisturbed mass ratios, even with long supply lines.
  • Stable operating voltage on site in mobile operation, e.g. Containers, trailers, roll containers etc.
  • Filtering and suppression of disturbances on the input to the output side.
  • Fully automatic continuous operation: The DC-DC converter can constantly work with the battery
  • Surveillance-free operation: multiple protection against overload, overheating, over voltage, short circuit, Misconduct and deep discharge of the battery through electronic regulation to complete
  • Switch off by built-in safety switch.

Product parameters:

Main battery " Bord "
Lead-Acid, Gel, AGM Batteries Nominal Voltage12V
LiFePO4 Nominal Voltage12.8V
lithium- ion( NCM) Nominal Voltage11.1V
Capacity (Battery Size), recommended:45-280AH
Vehicle Starter Battery "Start II":
Vehicle Starter Battery Nominal Voltage:12V
Min. Battery Capacity (Size), recommended:60AH
12 V / 12 V B2B Charging operation
Input Voltage Range "Start II" ,"D+" controlled:10.5-16V
Maximum charging power:650W
" Bord " Max. charge current30A
Activation Control Input "D+"8-16V
Signal Output "OK/TR", Switch Position "TR",
Cutoff Relay Bypass/max
12V/1A
Signal Output "OK/TR", Switch Position "OK"12V/1A
Input "T T" for Battery Temperature Sensor "Board I":YES
" Ss-" "Ss+" Inputs Sensor Cables "-" and "+" for Battery "Board I":YES
stand-by current24mA
Main battery overvoltage protection15.5V
weight1.44kg
demension190×194×70mm
Operating temperature-20-50ºC

Quality DC to DC Converter MPPT Solar Charge Controller Battery Charger for sale
Send your message to this supplier
 
*From:
*To: SHENZHEN COENG TECH CO., LTD.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0