IEC 60068-2-32 Standard 1000mm 500mm Repeated Free Fall Tumble Tester
![]() |
....8 and other test standards. Application: Repeated free fall tumbling test apparatus is suitable for continuous rotation drop test of small consumer electronic products such as mobile phones, cameras, tablets, Bluetooth speakers, chargers, earphones, Pad,...
Infinity Machine International Inc.
|
Battery Free Falling Impact Testing Machine Impact Height 1000mm Conform IEC 62133
![]() |
...) diameter rod is placed crosswise at the center of the sample. (2) A 9.1kg or 10kg weight falls from a height (61CM or 100CM) at the intersection of the specimen and the steel bar. Testing Standards: IEC 62133:2012 specifies requirements and tests for the...
DongGuan Q1-Test Equipment Co., Ltd.
|
Mechanical Shock And Impact Free Fall Drop Test Machine For Bucket And Bottle Drop Test
![]() |
...Free Fall Drop Test Machine For Bucket And Bottle Drop Test Mechanical shock and impact free fall drop test machine for bucket and bottle drop test Application: Drop Test Machine is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design. Mechanical shock and impact free fall...
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
Antirust Free Fall Drop Test Machine Rainproof Impact Height 300~1000mm
![]() |
..., etc.The whole machine or plastic shell of IT products is subjected to steel ball impact resistance test to evaluate the impact resistance of the product. The characteristics of: The machine can make free drop test on the surface, Angle and edge of...
Guangdong ALI Testing Equipment Co,.Ltd
|
Sample Installation Free Fall Drop Test Machine With 200cm Drop Height For Laboratory Test
![]() |
... impact incidence when the package in using, transportation and decorating. Labtone "1G+" project strictly ensure the accuracy. Besides precision plane drop testing, it also can undertake edge and angle test to...
Labtone Test Equipment Co., Ltd
|
Lithium Battery Testing Equipment UN38.3 Cell 9.1kg Mass Free Fall Impact Test Machine
![]() |
...usually 610mm) Horizontal Steel Rod: 15.8mm Impact direction: Free fall Height accuracy: 0.1mm Explosion proof Test chamber feature: Made of SUS 304 stainless steel One cable hole for test wire feed through Hammer electric lifting Front door mounting with...
Dongguan Gaoxin Testing Equipment Co., Ltd.,
|
Free Fall Drop Test Machine For Single Battery And Battery Pack
![]() |
...facilitate the clamping of the sample. 3. The equipment can achieve low height drop test of rib, face and angle. The drop height can start from zero. 4. The device can perform the drop in one arm, meet the drop requirements of the single ......
Dongguan Haida Equipment Co.,LTD
|
Free Fall Drop Test Machine For Packaging
![]() |
300~1500mm drop height, adjustable The drop height can customized The machine can add guardrail With Limit switch for protection machine Packing Drop Test Machine also known as a drop tester or drop impact tester, is a device used to simulate the impact......
ASLi (China) Test Equipment Co., Ltd
|
IEC 60068-2-31 Mechanical Strength Test Repeated Free Fall 500mm /1000mm Rotating Barrel
![]() |
...Repeated Free Fall 500mm /1000mm Rotating Barrel for Mechanical Strength Test 1. Introduction The rotating barrel also called as tumbling barrel is designed according to IEC60068-2-31clause 5.3/figure A.1, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The test is to check the mechanical strength of the electrical appliance like plugs and socket-outlets, the sample shall be placed in the tumbling......
Pego Electronics (Yi Chun) Company Limited
|
5r/min Home Appliance Testing Equipment Rotating Barrel Test Apparatus For Repeated Free Fall Test
![]() |
...Testing Equipment Rotating Barrel Test Apparatus For Repeated Free Fall Test Standard of Home Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical appliances – Safety – Part 1: General requirements clause 21.1; IEC 60068-2-31: 2008 Environmental testing – Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens clause 5.3 and Annex A; Application of Home Appliance Testing...
Guangzhou HongCe Equipment Co., Ltd.
|